Shure PG81-XLR Condenser Microphone with XLR Cable Buy ...

 Cardioid Condenser Instrument Microphone has a frequency response of 40Hz to 18000Hz, offering linear, smooth signal reproduction of acoustic guitar, cymbals, piano, strings, woodwinds and ensemble capturing. This mic also has lightweight, slim-profile design, making it ideal for overhead capturing on a drum kit. Its cardioid pickup pattern is effective in minimizing noise and ambiance at the off-axis sections of the capsule, making it less susceptible to feedback when using near monitor speakers. An internal shock mount protects against structure born noise. The microphone features an On/Off switch and is powered via external phantom power source or AA battery. A 15-foot cable, mic clip and storage bag are included.

Item Includes

• 15' (4.57m) XLR to XLR Cable
• Mic Clip
• 5/8" to 3/8" Thread Adapter
• Storage Bag

Features

Flat frequency response is wide and uniform. Consistent sensitivity through frequency range.

Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.

Condenser cartridge has a lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances.

Powered by AA battery or phantom power supply.

Internal shock mount for reduced handling noise.

Durable metal construction.

On/off switch for onstage control.

Specification

Microphone Type: Condenser (electret bias)

Polar Pattern: Cardioid (unidirectional), symmetrical about axis

Frequency Response: 40 to 18,000 Hz

Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector

Output Impedance (at 1000 Hz): 600 ohms

Sensitivity (at 1000 Hz): -48 dBV/Pa, (4.0 mV), 1 Pascal = 94 dB SPL

Electromagnetic Hum Sensitivity: -7 dB equivalent SPL in a 1 millioersted field (60 Hz)

Switch: Built-in On/Off switch

Recommended Input Load Impedance: 800 ohms minimum

Output Clipping Level (1 kHz, 1 % THD) 2000 ohm load:
-13 dBV (0.22 V) (phantom)
-17 dBV (0.14 V) (battery)

Maximum SPL: 2000 ohm load: 131 dB (phantom), 127 dB (battery)

Self-Noise (Equivalent SPL): 20 dB typical, A-weighted

Dynamic Range (maximum SPL, 2k ohm load, to A-weighted noise level): 111 dB (phantom); 107 dB (battery)

Signal-to-Noise Ratio: 68 dB (IEC 651)* at 94 dB SPL

Connector: Three pin professional audio connector (male XLR type)

Case: Steel and brass construction with black painted finish

Environmental Conditions: This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%.

Weight:
Net: 250 g (8.8 oz) less battery
Packaged: 880 g (1 lb 15 oz)